cosmetic_dentistry/t13_cosmetic_dentistry.htm

 

Tooth wear due to bruxism (teeth grinding). -

Pictures of damaged teeth. / Digital makeover (before-and-after) examples showing how repairs can be made using dental crowns.

The smiles of people who clench and grind their teeth typically develop a characteristic look. It's one where their teeth are worn flat across, as if they've been ground down using a file.

The pictures on this page provide examples of this wear pattern. Each comes from our group of virtual smile makeovers that features before-and-after picture sets illustrating (and explaining) how the damage caused by tooth grinding might be fixed.


A typical case.

When looking at the smile below, any dentist would quickly conclude that this person has a bruxing habit.

A classic look of someone who grinds their teeth.

A picture of a person whose teeth have been worn by bruxism.

View the full-size makeover animation for this case.

The word "brux" is the term that dentists use to refer to a patient's habit of tooth clenching and grinding.

This activity may be something that they do: 1) Subconsciously during their waking hours, 2) While they sleep, or 3) Both.

The classic wear pattern.

A picture of a person who has a normal (non-worn) smile.

The look of a normal (non-worn) smile.

To fully understand the type of damaged that has taken place in the picture above, one needs to know what the teeth of a normal smile usually look like.

a) Normal smiles.

When looking at a person's 6 upper front teeth:

  • The central incisors (center teeth) are usually about the same length as the cuspids (eyeteeth).
  • The lateral incisors (the teeth in between the centrals and cuspids) are just a little bit shorter.
 

b) The smiles of bruxers.

A picture of a person who has tooth wear due to tooth grinding.

The even look of teeth worn down by bruxism.

When teeth have been worn down from a habit of tooth clenching and grinding:

  • All of the upper front teeth usually have a similar length.
  • Instead of having gently rounded contours, their biting edges are frequently worn straight across. (They often display chipping, see additional pictures further down on this page.)
  • It's often easy to imagine how the flattened biting edges of the lower teeth match up exactly with the flat edges of the upper ones. (This being the position the jaw is held in when the person grinds.)
 
Takeaways from this section.

This same general wear pattern tends to occur naturally as we age. And often by the time a person has reached their "senior" years it has become quite noticeable.

That's why the smile of a bruxer looks aged. Restoring the person's teeth back closer to their original shape returns "youthfulness" to their smile.

The fix.

a) Restoring the relative lengths of the teeth.

The "after" picture for this makeover case (the "normal" picture above) shows how a dentist might rebuild this person's teeth by way of placing dental crowns.

The goal would be to return the teeth to a similar length pattern as existed before. (Central incisors and canines about the same, with the lateral incisors just a little bit shorter.)

A compromise may be necessary.

The precise length that's possible for the restored teeth may not be their original one. And, in fact, with most cases it probably won't be. (Read the 'takeaways' box below for more details.)

However, the exact length that's re-established for the teeth isn't as important as the pattern that's created. Recreating a "normal" pattern (like the one illustrated in our "normal" picture above) is what returns a smile to a more customary and youthful appearance.

 
Takeaways from this section.

As mentioned above, the length that's possible for a person's restored teeth may not be the same one that existed before their wear took place. The degree of change that's possible will be dictated by their bite, as it is now at this point in their life.

While the damage caused by grinding is frequently most obvious on a person's front teeth, it's likely that their back teeth have worn down too (it just depends on the position their jaw is held in when they grind).

And while these changes (both front and back) have been slowly taking place, the person's jaw joint will have gradually adapted to this new configuration too.

That means that when making a fix the dentist can only make changes for the front teeth to a degree that they:

  • Don't keep the back teeth from coming together.
  • Don't cause problems for the jaw joint by significantly altering the person's bite.

All of this means that, while some degree of modification can be made, the teeth likely can't be returned to the same (full) size they were before the damage took place. This would be especially true with cases where extreme amounts of wear have taken place.

b) Dental crowns probably make the best choice.

When formulating a plan for fixing the damage caused by bruxism, the treating dentist will have concerns about which types of dental restorations might make a suitable choice for the repair.

A primary concern will be that the new restorations must be able to withstand extreme forces generated during episodes of clenching and grinding. (Even in cases where a person's bruxism is "controlled," a dentist must anticipate that at least some such episodes may continue.)

In a majority of cases, dental crowns will likely make the most durable, longest-lasting choice (as opposed to porcelain veneers or dental bonding).

 
About choosing dental crowns.

PFM crowns.

Because of the great strength characteristics that they offer, porcelain-fused-to-metal dental crowns (PFM's) are often utilized. They're known for being durable and lasting restorations.

As a draw back, the ceramic surface of these crowns can be abrasive to teeth that bite against them.

As a solution, and as long as doing so doesn't unduly compromise the restoration's aesthetics, it may be possible for these tooth-contact surfaces to be metal (which is kinder to the opposing teeth).

All-ceramic crowns.

The prudence of choosing all-ceramic crowns for a bruxer simply depends on the type of "porcelain" from which they're made.

Some types of ceramics are fairly fragile and not capable of withstanding great forces. Others (like the compound zirconia) have substantial strength characteristics.

The trade-off encountered when using stronger types of ceramics is one of a greater risk of wear of the opposing teeth and a slightly less natural-looking appearance.

Gold crowns.

Gold crowns make one of the best choices for restoring bruxism cases.

Gold has a wear coefficient that's similar to enamel, which means it won't cause excessive damage to opposing teeth. And since it's a metal, crowns made out of it are unlikely to fracture.

Of course, the big disadvantage of this type of restoration is its appearance. It can make an excellent choice for back teeth but few people want gold up front.

Obviously, choosing the right type of crown is a complex issue and you'll require the advice of your dentist.

About porcelain veneers.

Historically porcelain veneers have had the reputation of being brittle, thus making them a poor choice for applications where they are subjected to heavy clenching and grinding forces.

(This page provides background information about the differences between dental crowns and porcelain veneers and can give you an idea of when each is typically used. One primary advantage of veneers is that less tooth structure is trimmed away when they are placed.)

At this point in time, there are synthetic "porcelains" that can be used to fabricate veneers. And some of these materials are several times stronger than their predecessors. (Two brand names are IPS e.max® and BruxZir®.) However, one trade off is that these materials aren't as aesthetically pleasing (life-like, natural-looking) as traditional materials can be.

Since considering the placement of porcelain veneers for bruxers lies contrary to traditional conventional wisdom, be sure to quiz your dentist. Ask...

  • Specifically what type of ultra-strong ceramic will be used and why they have chosen it.
  • What they feel is the usual success rate for this type of restoration in this application. (Newer materials and techniques have less established track records.)
  • What their experiences have been with this approach with other patients. (Dentists learn by using new techniques with actual patients. Make sure you understand if you will be one of them.)

The bruxism must be controlled.

!! This is probably the most important section of this whole page.

It's imperative for the patient to understand that whether or not they have repair work performed, if their teeth-grinding habit continues some type of dental damage will continue to occur.

Methods of control.

  • It's possible that by bringing their habit to their attention, a person may be able to control their bruxing activity during their waking hours. However, for many people this approach won't provide an effective solution.
  • For protection while asleep, a "nightguard" appliance should be worn.
  • For bruxers who can't control their daytime habit, this same appliance may need to be worn somewhat during their waking hours too.

The consequences of not controlling grinding activity.

As mentioned above, if a person's grinding habit isn't brought under control some type of ill effects will continue to occur.

The patient must understand that by choosing to proceed with the repair and restoration of their teeth they are only treating a symptom of their condition, not the condition itself.

Picture of Extreme natural tooth wear due to opposing unpolished dental crowns.

Natural tooth wear caused by opposing dental crowns. See 'Takeaways' box below for details.

  • In the case where no reconstructive treatment is performed, damage to the person's natural teeth will continue to occur. The rate of wear may accelerate as (harder) tooth enamel is worn through and the (softer) dentin inner layer of the tooth becomes exposed.
  • Any new restorations that have been placed will be exposed to the wear and tear effects of bruxism. Their superior strength may help to slow down the changes that occur but it can be expected that this continued activity will impact how long they will ultimately last.
  • In some cases, placing restorations may aggravate the patient's condition. For example, they may change the nature of or accelerate the rate of damage experienced. (See "takeaway" box below.)
Takeaways from this section.

Any porcelain restoration whose surface has been 'adjusted' (trimmed on) and afterward isn't properly polished or glazed can be quite abrasive to the teeth that bite against it. (Unfortunately, this situation isn't terribly uncommon. Our picture above shows an example.)

The result can be one where the restorations placed to fix the damage caused by tooth grinding can actually cause more of it to occur, likely at a faster pace.

This is not only a concern for opposing natural teeth but also those supporting any type of dental work.


Even placing dental restorations that meet the highest standards can't create a situation where your teeth and their supporting structures are immune to the effects of continued bruxism.

  • The type of damage that occurs may be similar as before (such as tooth wear or crown perforation or breakage).
  • Or it may change in nature (excessive forces can lead to tooth nerve irritation or cause damage to the bone supporting the teeth).

Tooth grinding is a harmful parafunctional habit that must either be controlled or at least minimized (typically by wearing a protective appliance).

Additional pictures of tooth damage caused by bruxism.

Just as above, any dentist looking at this picture would immediately come to the conclusion that this person has a serious tooth-grinding habit.

The classic appearance of a person who grinds their teeth.

A picture of a person's teeth that have been worn by bruxism.

View the full-size makeover animation for this case.

It's a simple equation: Prolonged periods of tooth-to-tooth contact = Tooth wear.

With this example, it looks like most of the upper front teeth have portions that have simply been ground off. (And, in effect, they have.)

You can actually see how the flat, worn biting edges of the lower teeth mirror the flat, worn surfaces of the upper teeth. (When this person does their grinding, it's apparent that they hold their lower jaw just slightly to their left.)

Takeaways from this section.

The dark coloration of the upper left tooth is frequently a sign that it is either in need of or has already had root canal treatment.

This is a separate dental issue and not necessarily related to this person's tooth grinding habit.

Picture A.

Picture  of examples of worn teeth.

Types of tooth wear.

Other classic signs of tooth grinding.

Not all cases of bruxism involve a situation where all of the teeth have been worn down flat.

a) Wear facets.

Depending upon the alignment of the person's teeth, one or more of them may cause or receive the bulk of the damage.

As an example, picture "A" shows a case where:

  • The center upper and lower teeth show the flat-across type of wear that's often seen.
  • The lower teeth off to the side show evidence of wear (termed 'wear facets') but it's less extensive than on the center teeth.
  • The opposing upper side teeth likely have corresponding wear facets on their backside.
 

Picture B.

Picture of tooth-edge chipping due to tooth grinding.

Tooth chipping related to tooth wear.

b) Tooth chipping.

Another phenomenon that's often seen with teeth that have worn down due to tooth grinding is chipping.

Enamel is a strong dental tissue but it's also brittle. If it's worn down to a very thin, sharp edge, tiny fragile bits of it will tend to chip off.

In cases where a large portion of the biting edge has been worn thin, larger sections of tooth structure may break away.

Takeaways from this section.

In picture "B", the faint band of grey running across the biting edge of the upper tooth indicates that this area has worn fairly thin.

The grey color is due to the fact that much of the light that strikes this portion of the tooth passes right through it (it's translucent).

In contrast, higher up where the tooth is thicker, light isn't able to pass through but is instead reflected off and back out of the tooth. This gives it its expected white coloration.

Written by: Animated-Teeth Dental Staff

 

Bruxism makeover cases illustrating how dental crowns can be used to repair worn teeth.

Here's a sampling of cases from our Virtual Makeover database. Each one is a before-and-after picture set showing the type of damaged that tooth grinding can cause and details about how the subject's teeth might be rebuilt.

To see additional cases, use the "View Similar" button below.


Restoring a darkened front tooth and its neighbor with dental crowns.

This digital makeover shows how the use of just a few dental restorations can sometimes...

Click image.

a) Dental crowns - With this makeover simulation, crowns are used to improve the color, shape and apparent alignment of teeth. b) Causes - It's possible that much of the wear has been caused by a tooth grinding habit. c) Root canal treatment - It seems likely that there is a history of nerve-space issues with the darkened tooth.


Fully closing in the gap between two incisors by placing crowns.

This page's digital makeovers illustrate how "tooth gaps" can be filled in by placing dental...

Click image.

a) Tooth gaps. - The obvious cosmetic deficiency with this smile is the space between the center teeth. b) Bruxism - The notched and worn biting edges of the upper and lower front teeth suggest that this person has a tooth grinding habit. c) Dental crowns. - This makeover illustrates how dental crowns can be used to both fill in tooth gaps and repair worn teeth.


Using dental crowns to repair the damage caused by bruxism.

This digital smile makeover provides an example of teeth that have worn, primarily due to bruxism (...

Click image.

a) Tooth grinding - The wear pattern visible with this case suggests that a history of bruxism is involved.b) Dental crowns - This case explains why dental crowns would likely make the best choice for making repairs.


search

Menu ▶  Additional Digital Makeover Cases

 
search

Plain text

  • No HTML tags allowed.
  • Lines and paragraphs break automatically.
Please answer the question so we know you're a human.